银娱优越会

Formation Density Probe

The Formation Density probe provides a calibrated, borehole-compensated density measurement using a detachable 137Cs gamma source and dual shielded detectors.

The far spaced detector (LSD) is calibrated, giving the best estimate of formation density as borehole wall effects are minimised. A shorter spaced detector (HRD) is also calibrated which provides improved vertical resolution. An optional shorter spaced third detector (BRD) provides a qualitative log with excellent vertical resolution for bed boundary delineation.

Principle of Measurement: 

The source and detectors are held in contact with the borehole wall by a spring-loaded caliper arm measuring diameter for borehole compensation. Gamma radiation from the source is back-scattered (Compton effect) in the formation, reaching the detectors where the relative counts are measured using sodium iodide scintillation detectors. Calibration constants are determined using a water tank and an aluminium block which has previously undergone a primary calibration. The calibration constants are combined with the gamma counts and diameter readings in the supplied software to give a calibrated density in g/cc.

For detailed specifications, please contact EPC!